How To Panel A Wall: DIY Wall Panelling In 8 Simple Steps
In wall treatments, painting and wallpapers are outdated due to their high maintenance requirements. Nowadays, a classic or durable wall finishing technique is in trend due to its astonishing aesthetic outputs. The DIY installation of these panels is a challenging task, it requires comprehensive skills in panel measurements, cutting, and sticking. Fixit Dubai has manifested the complete procedure for fixing wall panels in 8 easy and effective steps. By following all the given steps, you can accomplish your DIY wall paneling project.
Wall Paneling | A DIY Guide To Install Wall Panels
With two common paneling types– Decorative and FRP, you can consider any wall paneling idea as per the wall specifications and your desire. In decorative wall panels, medium-density fiberboards (MDF) are utilized to install on wall surfaces that mimic the wooden, stony, or brick appearance. These waterproof fiberboards are designed with a variety of textures to enhance the ambiance of living room, bedroom, and kitchen walls.
On the other side FRP wall panels are compactly manufactured with plastic and fiberglass. These pebbled or smooth panels are designed only with solid colors to make the wall surface stain-resistant. In addition, these washable panels are most commonly utilized in damp places such as bathrooms, basements, kitchens, and laundry areas.
Stuff You Will Require To Fix Panels
- Circular Saw
- Utility Knife
- Measuring Tape
- Electrical Nailer
- Adhesive Material
- Hammer
- Caulking Gun
- Jigsaw
- Nails & Pins
- Sandpaper
- Safety Gloves
Step 1:
Choose The Style Of Wall Paneling
The first step is to choose an appropriate wall paneling style because a galaxy of wall-paneling ideas are dominant these days. The most popular wall styling ideas are Shiplap, beadboard, reclaimed wood, wainscoting, 3D, and geometric. Choose the panelling material that can sustain the temperature and humidity of your room. After choosing the specific material and style, place the material in room 36-48 hours before starting the DIY project.
Step 2:
Wall Preparations & Measurements
After choosing the specific style, you need to level the rough wall surface. If the wall surface has major depressions, bulges, and spots, utilize the best quality compounds. When the wall surface has been dried, you can use sandpaper to make the surface consistent and smooth. Moreover, if your room has multiple obstructions such as moldings or baseboards, you should also remove them to avoid inconvenience during the installation project.
Step 3:
Cut Wall Panels As Per Requirements
The next step after wall preparations is the cutting of panels as per specific requirements and wall dimensions. Employ the circular saw or jigsaw to precisely cut the panels and leave 2-3 inches on each side for expansion of paneling materials. Before cutting the panels, take precise measurements of the walls with the help of measuring tape.
Step 4:
Switch Off The Electric Panel
In making cutouts, we will turn off the power to the light switch or outlet by switching off the circuit. This helps prevent accidents while paneling in the surrounding electric circuits and wires. You should also remove the electric wires by pulling them from the backside of the circuit to avoid disturbance. After removing the faceplate, mark the periphery of the boards with a marker for perfect panel cutting and fitting.
Step 5:
Apply Adhesive Material
The next step after the proper cutting of panels is the application of adhesive material to the backside of each panel strip. It must be ensured that adhesive material is spread on the entire surface of the strip for robust attachment. Therefore, apply the high-quality adhesive material on the panel strip in a zig-zag manner to cover the complete surface. In addition, you should also consider that adhesive material remains wet for a few minutes until attachment.
Step 6:
Attach Panels To The Wall
This step is very important in the entire wall-paneling process because it requires proper skills and concentration. For panel attachments, always start from any side or corner to get complete insight about the remaining portion. Before proper fixing, you can check the uniformity and level of a panel with a laser level by just placing the panel on the desired surface. After proper attachment, tighten each panel with 10-15 nails or screws.
Step 7:
Fill The Gaps
In this step, we will fill the gaps that arise between the panels to make the surface smooth and seamless. To fill the gaps, you can utilize the best quality caulking materials such as silicone, latex, or acrylic materials. Fill these materials with the help of a caulking gun to make the filling process easier. After filling the material in the desired place, remove the extra material with a clean cloth to make the surface clean and neat.
Step 8:
Give Final Finishing Touch
The installation process almost has been completed now but you need to give a final finishing touch. For a perfect finishing touch, you can utilize high-quality paint or primer in contrasting shades. If you want to make the ambiance more vibrant, use solid colors otherwise you can opt for multiple light or neutral colors. A selection of perfect colors, textures, and strip patterns can ultimately enhance the interior living style.
Wrapping Up on How to Panel a Wall?
It is concluded with remarks that panelling a wall surface not only improves the ambience of your wall but makes it more durable, waterproof, thermostable, and resilient. Fixit Dubai has demonstrated an entire paneling procedure in a step-by-step guide. Moreover, we have also assembled all the required materials or tools to make your journey smooth and easier. By following all the aforementioned steps, you can get an excellent experience with DIY wall paneling.
