Due to timeless appeal and intricate traditional patterns, parquet floors are the widely known and functional choice for both residential and commercial renovations. With the intense use, these floors began to show signs of wear and tear over time, requiring sanding and refinishing to restore their original dimensions and beauty.
The process of sanding can renew the charm of this floor treatment, unveiling the hidden beauty underneath. These floors when obscured due to spills, scratches, and heavy foot traffic can be ideally treated with the sanding process. To ensure the restoration of former glory for many years to come, Fixit Dubai has come up with a brief guide for your help.
Step-By-Step Tutorial For Parquet Floor Sanding And Refinishing
Before you begin, it’s mandatory to assess the direction of grains for these floors which are often arranged in geometric patterns, featuring different layouts and grain directions. This assessment will contribute to the selection of the right sanding approach for parquet flooring.
1
Gather Requisite Tools And Materials
Ensure you have the following tools and equipment for a successful sanding project.
- A Drum
- Orbital Floor Sander
- Edge or Hand-held Sander
- Sandpaper in Various Grits
- Vacuum Cleaner
- Duster or Broom
- Dust Mask
- Ear Protection Essential
- Safety Goggles
- Plastic Sheets
- Spatula or Sharp Knife
- Wood Filler or Glue
- Stains And Varnishes
1
Prepare The Floors
Before you initiate the sanding process, ensure creating a decluttered space that is free from dirt and debris. To clear out the room, remove the furniture elements, rugs or carpets, and any other furnishings in your living spaces.
To clean your room, first of all, go for sweeping using a broom to remove the surface dirt. For detailed cleaning, you can utilize an efficient vacuum cleaner. Lastly, wipe down the entire surface with a damp mop and let the area dry for an appropriate time.
Also Visit: How to Clean Parquet Flooring? A Step By Step Guide
2
Repair Any Damages
After you are done with cleaning and preparing your floors, it’s time for an inspection to assess all sorts of damages. Assess the damage by looking for loose or cracked tiles, out-of-order tacks, and stripes, or any worn-out or broken nails.
To set out the loose tiles with gaps, you can use the wood filler that can be directly applied using a spatula or sharp knife and glue to make the surface smooth while eliminating the gaps. After that, protect the surroundings using plastic sheets that will seal off doorways, vents, and other parts of the home from the spreading of dirt and sanded wood particles.
3
Choose The Right Sandpaper
The sandpapers come with variable grits which is why they can be selected after the assessment of damaged floor condition. You can begin with coarse grit with 36-40 for a heavily worn floor as it is effective for removing the old finish, scratches, and stains.
For floors with minor scratches and stains, it is suggested to use medium grit sandpaper of 60-80 that smooths out the wood instantly. For final touches, you can use a fine sand grit of 100-120 grit.
4
Sand Your Parquet Floors
Start sanding your floors in the direction of grains while working from the center of your room toward the edges. Sanders comes according to the magnitude of the space. So, you can select a drum sander for large areas and an edge sander for the corners and edges of your rooms.
Ensure that you are wearing a mask, ear protection, and goggles for your protection and health concerns. When you are fully prepared, go for rough sanding using sand grit of 36-40 to remove the old dents and finish. Then proceed with medium sand grit of 60-80 to eliminate surface imperfections. Lastly, opt for fine sanding using grit of 100-120 to create an even or smooth finish.
5
Repeat The Sanding Process And Finish
Once you are done with the sanding process, use an edge sander to assess or sand the parts of the room that couldn’t be accessed by the drum sander. After that, inspect the floor to check for imperfections like uneven areas, missed spots, or swirl marks, and sand the area with a fine sander for a final touch.
When you are satisfied with the sanding process, use a vacuum cleaner to remove all the surface dirt, wood dust, and other particles. The final step is the selection of varnishes, oil, or stains for staining, sealing, or varnishing. When applying finishes, remember the manufacturer’s instruction to not face any hassles. After application of varnishes and sealant, let the area dry completely. Tap yourself at the back as you are done with the sading of parquet floors for a restored look.
Final Thoughts!
Parquet traditional floors are renowned for their versatility, tensile strength, and ability to be sanded or refinished to restore their original dimensions. Sanding and refinishing these floors timelessly eliminates the scratches, scuffs, and dents from their surface. To restore the original aesthetics and appearance of your floors, you need to grab the right tools first.
Prepare the area while repairing the damage and then select the best sandpaper. Using the effective equipment, sand down your parquet floors. If the stains and scratches persist even after sanding, you can repeat this process and give the finishing touch in the end with the application of varnishes. Here, you are done with sanding your floors to restore their original shine and sleek appearance.
